CAC 2015-10-06
This page is obsolete and archived!
- For the DPS8M Simulator visit https://dps8m.gitlab.io/
- For the Multics operating system visit https://swenson.org/multics_wiki/
- For Multics history visit https://multicians.org/
Looking into MFS record addressing issues…
block_len = ceil (ceil (rec_len / 4) / sect_size) * sect_size;
count_limit_fixed = ceil (block_len / sect_size); /* and sector count limit in seek data */
next_key = current_key + sectors_for_record;
sectors_for_record = ceil (rec_len / (4 * sect_size));
//key appears to be in sectors.
BUILD_NORMAL_SEEK:
idcw.command = seek_command (dev_type);
unspec (seek) = "0"b;
seek.block_count_limit = count_limit_fixed;
seek.ti = track_indicators;
if is_sv
then do; /* convert the key to real sector */
sector_offset = mod (key, sect_per_cyl (dev_type));
seek.sector =
((key - sector_offset) * number_of_sv (dev_type)) + (sv_num * sect_per_cyl (dev_type))
+ sector_offset;
end;
else seek.sector = key;
unspec (seek_data) = unspec (seek);
goto SEEK_BUILT;
sector_offset is the number of sectors from the start of the cylinder.
key - sector_offset is the number of first sector of the cylinder.
Aghh. they interleave the cylinders...page revision: 0, last edited: 13 May 2025 21:15