CAC 2106-02-24

ISOLTS

Multics MR12.6: Yoyodyne Propulsion Systems (Channel d.h000)
Load = 5.0 out of 90.0 units: users = 5, 02/24/16  1338.7 pst Wed
l Clayton HFED
Password:
You are protected from preemption.
Clayton.HFED logged in 02/24/16  1338.9 pst Wed from ASCII terminal "none".

***tolts executive version 881028 on 160224 at 13.390

***enter "polts", "molts", "colts", "isolts", "quit", or "msg"
??? isolts

***isolts executive version 881028 on 160224 at 13.391
isolts: Creating >user_dir_dir>HFED>Clayton>isolts_err_log

***enter "test cpu <tag>", " display_error", "test pcd", "msg", or "quit "
??? test cpu b
asking operators permission to test cpu "b" using memory "b"
CONSOLE: ALERT
1339.4  Clayton.HFED.a:  permission asked to test cpu "b" using memory "b"
CONSOLE: ALERT
1339.4  Clayton.HFED.a:    

                              respond: x oqr grant 
                                   or: x oqr deny
M-> x oqr grant 

Ready
M-> 
CONSOLE: RELEASED
permission granted
asking operator to manually reconfigure cpu b
CONSOLE: ALERT
1339.9  Clayton.HFED.a:  execute the following manual reconfiguration on cpu "b":
CONSOLE: ALERT
1339.9  Clayton.HFED.a:   1. set all port and initialize enable switches and interlace switches to off.
CONSOLE: ALERT
1340.0  Clayton.HFED.a:   2. set the assignment switches for all ports to 000.
CONSOLE: ALERT
1340.0  Clayton.HFED.a:   3. set store size switches to 2222.
CONSOLE: ALERT
1340.0  Clayton.HFED.a:   4. verify that the mode switch is in vms.
CONSOLE: ALERT
1340.0  Clayton.HFED.a:   5. depress the initialize and clear push button.
CONSOLE: ALERT
1340.0  Clayton.HFED.a:   6. set the port enable switch "on" for port "b".
CONSOLE: ALERT
1340.0  Clayton.HFED.a:    when reconfiguration complete  
                              respond: x oqr done 
                                   or: x oqr unab
M-> x oqr done 

Ready
M-> 
CONSOLE: RELEASED
isolts: the following errors were detected while attempting reconfiguration:

isolts: scu b has no interrupt mask register assigned to cpu b

***isolts executive version 881028 off 160224 at 13.405

configure_test_cpu.pl1:

                              if pdata.online then do;      /* if this cpu is online, he is candidate for our mask cpu */
                                   found = "1"b;
                                   scs$processor_test_data.mask_cpu = j; /* save tag and assign mask to this cpu */
                                   call scr_util$assign_mask ((iscu), (pdata.controller_port));
Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License