CAC 2017-11-04

Remove OPERAND_READ/WRITE from CAF

OPERAND_READ used in
  IT_CI, IT_SC, IT_SCR

  IT_AD, IT_SD, IT_DI, IT_ID, IT_DIC, IT_DIC

OPERAND_STORE

  IT_AD, IT_SD, IT_DI, IT_ID, IT_DIC, IT_DIC

Write8 and others use APU_DATA_STORE, should the cycle type be passed in?

GTSS fail:

Error:  no_write_permission condition by !BBBKLmdFGpHzjW.temp.0324|326 (in process dir)
referencing >system_library_unbundled>gtss_fast_library_>0|2540

DBG(998047382238)> CPU REGDUMPFLT: E=000 A=000006000000 Q=000000000000 4.577636719e-05

DBG(998047382240)> CPU REGDUMPPR: PR0/ap: SNR=00234 RNR=4 WORDNO=002550 BITNO:00 ARCHAR:0 ARBITNO:00
DBG(998047382240)> CPU REGDUMPPR: PR1/ab: SNR=00322 RNR=4 WORDNO=002547 BITNO:00 ARCHAR:0 ARBITNO:00
DBG(998047382240)> CPU REGDUMPPR: PR2/bp: SNR=00324 RNR=4 WORDNO=000000 BITNO:00 ARCHAR:0 ARBITNO:00
DBG(998047382240)> CPU REGDUMPPR: PR3/bb: SNR=00324 RNR=4 WORDNO=000000 BITNO:00 ARCHAR:0 ARBITNO:00
DBG(998047382240)> CPU REGDUMPPR: PR4/lp: SNR=00247 RNR=4 WORDNO=000000 BITNO:00 ARCHAR:0 ARBITNO:00
DBG(998047382240)> CPU REGDUMPPR: PR5/lb: SNR=00247 RNR=4 WORDNO=000000 BITNO:00 ARCHAR:0 ARBITNO:00
DBG(998047382240)> CPU REGDUMPPR: PR6/sp: SNR=00234 RNR=4 WORDNO=000000 BITNO:00 ARCHAR:0 ARBITNO:00
DBG(998047382240)> CPU REGDUMPPR: PR7/sb: SNR=00234 RNR=4 WORDNO=000000 BITNO:00 ARCHAR:0 ARBITNO:00

DBG(998047382242)> CPU TRACE: 0: 00324:000000|000326 4 000140100540 (MLR PR0|140,F1) 000140 100(1) 0 0 0 00

fill: 000
T: 0
MF2 140

   AR 1
   RL 1
   REG 0

MF1 140

   AR 1
   RL 1
   REG 0

d1:

DBG(998047382242)> CPU FINAL: Read (Actual) Read:  bar iefpFinalAddress=57726327  readData=000000000001

Y-charn1: 0
CN1 0   
TA1 0  9 bit
N1 1  au  (6)
ADDRESS  PR0|0   234|0
   234 >process_dir_dir>!BLbDQbpbBBBBBB>stack_4

d2:

DBG(998047382242)> CPU FINAL: Read (Actual) Read:  bar iefpFinalAddress=57726330  readData=100000000001

Y-charn2 1
CN2 0
TA2 0 9 bit
N2 1  au (6)
ADDRESS  PR1|0  322:0
   322 >system_library_unbundled>gtss_fast_library_>0